Installation And Connection; Operating - Bartscher Deli Plus I ST Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Do not lay the cable over carpets or heat insulations. Do not cover the cable. Keep
away the cable from operating range and do not dunk it into water.
Do not move or tilt the device when in operation.
WARNING! Hazard via electrical current!
The device can cause injuries due to improper installation!
Before installation the local power grid specification should be compared with
that of the device (see type label).
Connect the device only in case of compliance!
Take note of the security advice!

5.2 Installation and connection

Discard the complete packing material after unpacking the device.
Place the device on top of an even and safe surface which supports the weight of the
device and is not heat sensitive.
Not at any time should you place the device on an inflammable surface (such as:
table cloth, carpet, etc.).
You must not position the device near open fireplaces, electric ovens/arc furnaces,
furnaces/electric heaters or other heat sources.
Keep a minimum of 20 cm from flammable walls and other objects.
The electrical circuit in the socket must be secured to at least 16A. Only connect the
device directly to the wall socket; do not use any extension cords or power strips.
Place the device so that the plug is easily accessible and can be quickly removed
from its socket in case of necessity.

5.3 Operating

Before first use
CAUTION!
The unit can only be used by persons properly trained in its use.
Remove the equipment (shelves, water tray) from the unit and wash thoroughly in
warm water with gentle washing-up liquid. Dry the clean elements thoroughly.
Wash the inside and outside of the cabinet with a soft, moist cloth and gentle
washing-up liquid. Wash again with clean water. Dry thoroughly with a soft cloth.
- 21 -

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

305.055

Table des Matières