Installation And Operation; Positioning And Connection - Bartscher Deli-Cool II D Mode D'emploi

5. Installation and operation

5.1 Positioning and connection

Positioning
•
Before the operation unpack the device and remove all package material and
protective foil from the device and equipment.
CAUTION!
Never remove the rating plate and any warning signs from the device.
•
Position the device in safe place of load capacity sufficient for weight of the device
with full content.
•
Never place the device on the flammable surfaces.
•
In order to avoid the compressor damages do not tilt the device during positioning
or transport by more than 45° .
•
Do not place the device in the vicinity of open fire, electric ovens, heating furnaces,
or other heat sources like direct sunlight. High temperature may damage the device
surface and may impact the cooling capacity and energy consumption.
•
During the device installation keep in mind that the environment temperature should
not be lower than 0 ° C and higher than 32 ° C.
•
Position the device in such way that free air circulation is assured. Remain distance
of at least 5 cm from the walls and other objects.
•
Never cover the ventilation holes of the device.
•
Do not place the device in places of high air humidity. The excessive humidity may
damage the device.
•
Do not bore holes or install other objects in the device.
•
Do not place any heavy objects on the device.
- 29 -