Installing Your Microwave Oven - Impecca CM-0773 Guide De L'utilisateur

INSTALLING YOUR MICROWAVE OVEN

Before installation and operation:
• Remove all packing materials and accessories.
• Examine the oven for any damage such as dents or a broken door. If the unit is damaged, do
not install. Contact technical support or the place of purchase.
• Remove any protective film found on the microwave oven cabinet surface.
Warning: Do not remove the light brown Mica cover that is attached to the oven
cavity to protect the magnetron.
INSTALLATION GUIDELINES
1. Select a level and stable surface that provides enough open space for the intake and/or out-
let vents. Blocking the intake and/or outlet openings can damage the oven. Do not place the
oven where heat, moisture, or high humidity are generated.
• A minimum clearance of 3 inches
(7.5cm) is required between the
oven and the adjacent walls. One
side must be open for proper ven-
tilation and heat dispersal.
• Leave a minimum clearance of 12
inches (30cm) above the oven.
• Place the oven as far away from
radios and TVs as possible.
2. Plug your oven into a standard
household outlet. Be sure the voltage and the frequency is the same as the voltage and
frequency on the rating label.
• Be sure that the power supply cord is undamaged and does noit run under the microwave
oven or over any hot or sharp surfaces.
• The socket must be readily accessible so that it can be easily unplugged in an emergency.
TURNTABLE INSTALLATION
Do not operate the oven without glass tray, turntable ring, and shaft in their proper positions (as
shown below).
Glass tray
Turntable sha
12 inches (30cm)
3 inches (7.5cm)
3 inches (7.5cm)
Turntable ring
7
Open
Glass Tray Turntable Ring
Turntable Sha