Installation
Installing speakers correctly is extremely important.
The volume of low frequencies will seem to change
according to the positions where the speakers are
installed. Test various installation positions to find
the best places for maximizing the capabilities of the
speakers.
•
Place the active unit to the left and the passive
unit to the right.
•
Place the speakers so that they form an
equilateral triangle with the listening position.
LEFT: Active unit
•
Install each speaker so that the top of its woofer
is at ear height.
•
Do not install speakers near mirrors, glass
or other surfaces that reflect sound. Do not
place anything between the speakers and the
listening position.
Specifications
General
8 Maximum effective output (distortion: 10%)
14W + 14W
8 Speaker units
3-inch (76.2mm) woofer
0.5-inch (12.7mm) tweeter
8 Enclosure
Bass reflex type
8
TASCAM VL-S3
RIGHT: Passive unit
8 Frequency response
80 Hz–22 kHz
8 Crossover frequency
8 kHz
8 Sensitivity
−4.8 dBV (580 mV) 14W+14W
8 External input jacks
RCA pin jacks, stereo mini jack
8 Input impedance
50 kΩ
8 Power
AC adapter (PS-P1524E)
Input voltage: AC 100–240 V (50–60 Hz)
Output voltage: DC 15 V
Output current: 2.4 A
8 Power consumption
6.2 W
8 Dimensions
110 x 170 x 138 mm (width × height × depth,
excluding protrusions)
8 Weight
Active unit: 1.1 kg
Passive unit: 1.0 kg
Dimensional drawing
110mm
•
Illustrations in this manual might differ in part
from the actual product.
•
Specifications and external appearance might
be changed without notification to improve the
product.
138mm