Focal PERFORMANCE EXPERT PS 165F Manuel D'utilisation page 6

PERFORMANCE EXPERT
PS 165F/130F - PS 165FX/165F3 - PC 130F/165F
U s e r m a n u a l
Fitting the tweeter - TNF (PS 165FX/165F3 - PS 130F/165F kit)
There are two mounting possibilities available: titled or flush mount. The tweeter arrives supplied in its flush-mounting pod.
Very carefully, remove the grille, by gently prizing it off (using a paper clip will help).
Titled mounting: mount the pod firmly using the screws supplied. Feed the wire through the hole in the pod and refit the
tweeter and grille in place.
Flush mounting: cut a neat 45mm diameter hole in the panel where you want to place the tweeter. Then with the metal
mounting strip held from behind (ensuring the ends are pointing towards the hole), insert the screw through the flush-mount
pod from the front and tighten the two parts together. Feed the wire through the hole in the pod and refit the tweeter and
grille in place.
2-WAY KITS CONNECTIONS - PS 130F - PS 165F
Input
Right output
Left output Input
Woofer
Tweeter
Woofer
Tweeter
6