Contents; Note The Following Before Starting - Husqvarna 125L Manuel D'utilisation

Kit de poignée en j
Masquer les pouces Voir aussi pour 125L:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 32

Contents

CONTENTS
Contents ......................................................................
Note the following before starting: ................................
What is what? ..............................................................
Cutting equipment ........................................................
General working instructions .......................................
Fitting the J-handle .....................................................
Fitting the suspension ring ...........................................
and grass cutter ...........................................................
Assembling the cutting equipment ...............................
Check before starting ...................................................
TECHNICAL DATA
Technical data ..............................................................

Note the following before starting:

Please read the operator's manual carefully and make sure
you understand the instructions before using the machine.
These instructions supplement the instructions that were
included with the machine. For other procedures, please refer
to the operating instructions for the machine.
Husqvarna AB has a policy of continuous product
development and therefore reserves the right to modify the
design and appearance of products without prior notice.
Long-term exposure to noise can result in permanent hearing
impairment. So always use approved hearing protection.
WARNING! Under no circumstances may the
!
design of the machine be modified without
the permission of the manufacturer. Always
use genuine accessories. Non-authorized
modifications and/or accessories can result
in serious personal injury or the death of the
operator or others.
WARNING! This accessory may only be used
!
together with the intended trimmer, see
under heading "Approved accessories" in
chapter Technical data in the machine's
Operator's Manual.
WARNING! Only grass blades/grass cutters
!
or trimmer heads/plastic blades may be used
when the J-handle is fitted. Saw blades must
never be used with the J-handle.
26 -
English
CONTENTS
IMPORTANT! Never use a cutting attachment without an
approved guard. See the chapter on Technical data. If an
incorrect or faulty guard is fitted this can cause serious
26
personal injury.
26
IMPORTANT! Wear boots with steel toe-caps and non-slip
sole if a grass blade is fitted to the machine.
28
The J-handle set contains the following
28
parts:
28
Loop handle
30
1 Loop handle
30
1 securing plate
30
1 bolt
30
1 wing nut
31
J-handle
1 J-handle
31
2 screws
1 harness
1 suspension ring
2 screws
1 grass blade
1 support cup
1 support flange
1 nut
1 socket spanner
1 transport guard

Publicité

Table des Matières
loading

Table des Matières