CAUTION
• Install with the left and right sides of the DVD Navigation Unit perpendicular
or parallel to your vehicle's direction of travel. Do not install diagonally to your
vehicle's direction of travel or the current location will be displayed incorrectly.
• If you install the left and right sides of the DVD Navigation Unit parallel to
your vehicle's direction of travel, switch the installation direction lever, and
attach the locking screw to the " " side, or else the G sensor mounted in the
DVD Navigation Unit will not operate correctly.
Forward / Art
direction of vehicle
Front
Front
(Perpendicular)
Attachment
position of the
locking screw
If you install with the left and right sides of the DVD Navigation Unit parallel to
your vehicle's forward / art direction
If you install with the left and right sides of the DVD Navigation Unit parallel to your
vehicle's forward / art direction, remove the mounting screw underneath the DVD
Navigation Unit, and switch the installation direction lever. Then change the screw mount-
ing position from " " side to " " side. If the screw is attached to the " " side, the G sen-
sor mounted in the DVD Navigation Unit will not operate correctly.
1. Remove the locking screw attached to the installation direction lever.
2. Switch the lever, and attach the mounting screw to the " " side.
Locking screw
Installation direction lever
Forward / Art
direction of vehicle
Front
(Parallel)
Attachment
position of the
locking screw
Underneath the DVD Navigation Unit
Forward / Art
direction of vehicle
Front
Front
Locking screw
Installation direction lever
14