Adjusting Of The Door-Spring Tension; Installation Of The Water Inlet Hose - Pkm DW9-7FI Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

1
4 pcs. 4*42 mm woodscrews
3
Door of the appliance
5
Decoration panel

2.6 Adjusting of the door-spring tension

After having installed the decoration-panel, try to open and close the door to check
its balance and to decide if it can remain in its installation-condition. When the
door is balanced improperly, turn the screws in clockwise and anti-clockwise
direction for proper adjustment (or let the balance adjust by an experienced
person).
1: hexagon screwdriver

2.7 Installation of the water inlet hose

Connect the inlet hose to a connector with a 3/4
inch thread firmly and securely. When the hoses are
new or were not used for an extended period of
time, let the water flow until the hose is clear of any
contamination.
NOTICE! Otherwise the water inlet may be
blocked and the appliance will be damaged.
2
1.) Remove 2 pcs. 4*10
2.) 4 pcs. 4*42 woodscrews
4
T-shape plug
6
4 pcs. 4*42 woodscrews
52

Publicité

Table des Matières
loading

Table des Matières