Special Functions - LG WM2455H Série Guide De L'utilisateur Et Directives D'installation

SPECIAL FUNCTIONS

The option buttons also activate special
functions, including CHILD LOCK, TUB CLEAN,
™
and SPINSENSE . Press and hold the option
button marked with the special function for 3
seconds to activate.
LOAD SIZE
At the beginning of the cycle, the washer tumbles
the load and detects the weight of the
clothes. The display will indicate the
approximate load size in the LOAD SIZE
display. This allows you to adjust the
amount of detergent and other additives for best
results and improved efficiency. See page 23 for
details.
CHILD LOCK
Use this option to prevent unwanted use of the
washer or to keep cycle settings
from being changed while the washer
is operating. Press and hold the
PREWASH button for 3 seconds to
activate or deactivate CHILD LOCK.
The lock icon will be shown in the display, and all
controls are disabled. The washer can be locked
during a cycle. Once CHILD LOCK is selected, the
display will alternate between CL and the
time remaining.
TUB CLEAN
A buildup of detergent residue can occur in the
wash tub over time and can lead to
a mildewy or musty smell. The TUB
CLEAN cycle is specially designed to
remove this buildup. Press and hold
the EXTRA RINSE button for 3 seconds to activate
this cycle. The display will show a message to add
liquid bleach to the dispenser. After the cycle has
ended, open the door and allow the drum interior
to dry completely.
NOTE: Do NOT use this cycle with clothes,
and do NOT add detergent or fabric softener.
H O W TO U S E H O W TO U S E
SPINSENSE ™
SPINSENSE can be used to help reduce or
eliminate vibrations, especially on wood
floor installations.
To activate SPINSENSE
While the washing machine is running in any cycle,
press and hold the STAIN CYCLE button for 3
seconds.
The SPIN SPEED button light will blink while
the washer is running to show that SPINSENSE
is active. The SPINSENSE function will remain
active for every cycle, even after a power failure.
To cancel SPINSENSE ™ :
Press and hold the STAIN CYCLE button for 3
seconds to turn off the SPINSENSE function.
BEEPER ON/OFF
You may turn the end-of-cycle beeper on or off
with the WATER PLUS button.Press
and hold the WATER PLUS button for 3
seconds to turn the beeper OFF. Press
and hold the WATER PLUS button again
for 3 seconds to turn the beeper back
on.
Certifi ed by NSF
Certifi é par la NSF
NSF International (formerly the National Sanitation Foundation),
certifies that SANITARY cycle reduces 99.9% of bacteria on
laundry, and none of bacteria will carry over onto the next laundry
load.
™
:
25