Assembly; Height Adjustment Of The Feet; Cleaning | Maintenance; Technical Data - Drive DeVilbiss Healthcare DELTA 150 Mode D'emploi

Assembly

The shower chair is preas-
sembled; only the 3 adjus-
table feet need to be as-
sembled (pic. 1-3).
2

Height adjustment of the feet

Before using the product,
adjust it to the desired
height (pic. 4). To adjust
the height of the legs:
Press button (1) and at the
same time, pull the leg out
or push it in until the but-
ton clicks into place in the
desired position (2). En-
sure that the pushbutton
has correctly clicked into
place.
Ensure that all three legs are adjusted to the same height.
Drive Medical GmbH & Co. KG | As per: 16.06.2020 | Errors and alterations excepted
1
3
4

Cleaning | Maintenance

• Clean regularly with a moist cloth!
• Do not use any aggressive cleaning agents!
• Do not use abrasive cleaners!
• Do not use any high-dose chlorine and vinegar-based
cleaners!
• To disinfect, a spray disinfectant can be used such as
Descosept AF or Bacillol AF.
• In the event of defects, contact your specialist dealer
from whom you purchased this product.

Technical data

Product
Article number
Overall width
Overall length
Overall height
Seat height
Diameter of seat surface
Total weight
Max. load
Material legs
Clip closure material
Material seat section
EN
DELTA 150
550300100
44 cm
44 cm
59 cm
44 - 59 cm
37 cm
1,7 kg
150 kg
Aluminium
Brass
PP (polypropylene)
9
Instructions for use DELTA 150