Velleman MML24CN Notice D'emploi page 11

referred to as Transmitting Master Computer (TMC). The TMC will have the display control software installed. It is not
necessary to install the software on the RSC. Next step is to set up a "Generic / Text Only" printer driver on the RSC
and share it with the TMC. Once the setup is done and a message is created, a simple click on the "Send Via
Network" button will bring up the "PRINT" dialog window. Select the "Generic / Text Only" printer and click "OK" and
your message will be on its way.
RSC Printer Driver Setup
 Click on "Start", "Settings" and "Printer". The "PRINT" dialog window will appear.
 Double click on the "Add Printer" icon. The "Add Printer Wizard" window will appear.
 Click on "Next". Select "Local Printer" and click on "Next" again.
 Under "Manufacturers", search for "Generic" and click on "Next". If prompted "A driver is already installed to this
printer", select "Keep existing driver" and click "Next".
 Select the COM port on the RSC the display will connected to and click on "Next".
 Under "Printer Name", type in the desired name (min. 12 characters long) for the Display Printer Driver. Select
"No" to select the printer as the default printer and click "Next".
 Click on "Finish" to complete the setup. Insert the CD or disk in the proper driver if necessary and click "OK".
 Select the printer you've created. Go to "File" and click on "Properties".
 Click on the "Details" tab and click on "Port Settings".
 Make sure the settings below are set accordingly. Click on "OK" when done.
Baud Rate
Settings
should be as
shown
 Click on the "Sharing" tab and click on "Shared As". In the "Share Name" box, type in the "Printer Name" used
earlier. Type in a password when desired.
 The RSC Printer Driver setup is now complete.
TMC Printer Driver Setup
 Click "Start", "Settings" and "Printer". The "PRINT" dialog window will appear.
 Double click on the "Add Printer" icon. The "Add Printer Wizard" window will appear.
 Click on "Next". Select "Network Printer" and click "Next".
 Select "No" to print from "MS DOS based programs". Click on "Browse".
 Double click on the name of the RSC on the network and select the created Display Printer Driver.
MML24CN/MML24R_v6
11
VELLEMAN