Lucci fini 210013 Instructions D'utilisation page 8

Installation Instructions
When the low battery indicator is flashing, this means that the batteries need replacing.
Fan speed indicator:
Displays the fans current fan speed level (high, medium, low, off).
Fan switch mode indicator:
Indicates the fan is operating in MANUAL mode or FAN AUTO mode.
Lighting status indicator
Displays the current light function ON or OFF.
BUTTONS ON THE REMOTE
FAN AUTO: Press the button to switch from FAN AUTO mode to MANUAL mode.
FAN SWITCH: Press the button to set fan running at HIGH – MEDIUM – LOW – OFF speed.
FAN TIMER: Press the button to start programming the timer to switch the fan off automatically, or to cancel the
timer.
LIGHT TIMER and TEMPERATURE Unit indicator ( °C / °F) :
Press the button once to start programming the timer to switch off the light automatically, or to cancel the timer.
Press and hold the button for 10 seconds to switch from degree Celsius to degree Fahrenheit display.
LIGHT DELAY: Press the button to activate the light delay function, which will turn off the fan 3 minutes later.
Temperature / Timer
Temperature / Timer
LIGHT switch: Press the button to turn ON/ OFF the light.
FAN AUTO Function
FAN AUTO function allows the fan to operate more efficiently with the use of the in-built thermal sensor.
Press the FAN AUTO button to activate FAN AUTO function, and then press the UP/DOWN buttons to set the
temperature at what you preferred. The fan will run at the HIGH, MEDIUM, LOW or OFF speed automatically via
comparing to room temperature as following:
Room temperature is lower than setting temperature:
Room temperature is equal to the setting temperature by 0 ℃: →
Room temperature is higher than setting temperature by 2 ℃: →
Room temperature is higher than setting temperature by 4 ℃: →
Press the FAN AUTO button again to turn off the FAN AUTO function.
FAN TIMER Function
8 | P a g e
: Set the temperature and time up
: Set the temperature and time down
→ OFF
LOW
MED
HI