Lucci fini 210013 Instructions D'utilisation page 7

Installation Instructions
A double pole wall switch must be included in the wiring installation. The double pole switch allows you to
disconnect the remote control from the mains 240VAC power during maintenance and cleaning of the ceiling
fan.
Operating the remote
Before you start using the remote, take the time to read through this section and get familiar with the function of each
button.
Fig. 5
Auto mode temperature/fan timer setting indicator:
This indicator displays the temperature setting of the fan in FAN AUTO mode, and the FAN TIMER value will switch
off the fan at the pre-set time. The indicator will switch every 2 seconds to display the set temperature and the fan
timer respectively.
Room temperature/Light timer indicator:
This indicator displays the room ambient temperature, and the LIGHT TIMER value which switches off the light at the
pre-set time. The indicator will switch every 2 seconds to display room temperature and light timer respectively.
Low battery indicator:
7 | P a g e