Operation
Start up
The appliance starts up and cools down inside after one hour,
otherwise the electrical connection must be checked.
Control panel
All keys would be invalid in lock mode. Please unlock
first.
ON / OFF
1. Keep the key pressed for 3 seconds, switch off, switch to standby mode.
2. Hold the button down for 3 seconds to return to normal operation.
Light
Press the key, turn on or off the LED lights inside. In standby mode, the
key is not valid.
Switch Zone
Press the button to move from the upper zone to the lower zone in
order to choose the temperature adjustment zone. Press the button
once, the LED display of the selected zone flashes regularly. Press the
up and down keys to adjust the temperature. Press the button again to
switch to the setpoint temperature for the chosen zone.
UP
Press the button once, the LED display flashing regularly indicates the
current set temperature. Continue to press the button to adjust the
setpoint temperature, one press increases 1 ℃. The regular flashing
stops after 5 seconds when the absence of pressure is detected and
the new set temperature is saved. The LED display returns to show the
actual temperature inside.
EN-25