Acc-Smart AQUANEST-M8 Manuel D'utilisation page 8

３. Keys Operation Instructions
Touch "OK" key in Lamp Initial Interface to enter Main Menu, Touch "+"or "-" key to switch menu.
Touch "OK" key to enter the Menu for settings, touch "OK" key to switch settings in Settings
Interface, touch "+"or "-" key to change values, after the completion of settings, touch "ESC" key to
exit, and the configured content will be saved automatically.
４. Function And Operation Instructions
Initial Interface
current time and running mode. The value in the bracket stands for the current timing that runs at
which timing period. For example, "Timer { 04 - 05 }" represents that the lamp currently runs at the
timing period between the fourth time point and the fifth .
Power On/Off This function allows you to turn off the light without disconnection of power.
When the lamp is turned off, the screen and Wi-Fi are still in working status. When in off status,
select on, the lamp will automatically return to riming mode.
Brightness It displays the lamp current brightness.
Dimmer You can adjust the brightness of each route light at will, so as to check the combination
effects of different lights, thus to realize light-matching function.
Configure Wi-Fi
Timer Set the sunrise and sunset timer, daytime and nighttime brightness, the lamp will
automatically simulate the gradient effect of sunrise and sunset.
System Time
operated normally.
Load Default This function will restore the timing, flash and cloud data to factory defaults,
except the time.
Temperature It displays the lamp's current shell temperature and the fan's running speed.
Language The lamp support English and Chinese, and you can switch on your own preference.
After the device is powered on, the lamp enters Initial Interface, display its
For specific functions and configurations of Wi-Fi working mode.
Change the date and the time into local time, so as to ensure the timing can be