Acc-Smart AQUANEST-M8 Manuel D'utilisation page 10

Wi-Fi STA Mode
in the same network like the smart phone, and you can use the smart phone to control the lamp.
This mode is applicable to synchronous of multiple lamps.
Method for Configuring Wi-Fi STA Mode
◆ Operate on lamp panel, enter "4.WiFi Config"—"2. STA mode, select "Yes", and press OK key for
confirmation, after the lamp restarts, the panel indicator light is in circulation state of "flicker for
two times---go out for one time", then it switches to the state waiting for connection of Wi-Fi
STA mode.
4. WiFi Config
5. Timer
定时
◆ Connect your phone Wi-Fi to home router ,
open the AQUANEST APP, press ">" key
on Wi-Fi page ,then get into STA Mode page .
Press here to get into STA Mode page
Acting as terminal device, the lamp is connected to the home router, which is
1. Wi-Fi AP Mode
2. Wi-Fi STA Mode
Home router name
定时
Set to STA Mode
YES NO
定时