Publicité
Les langues disponibles
Les langues disponibles
Meanings of Lamp Status Indicator Light
Indicator
The light is on but goes out
after about 3 seconds
Flicker for two times and go
out for one time
Flicker for three times and
go out for one time
Irregular flickering
Goes out
Fault Analysis and Removal
Fault
Phenomenon
The screen does not
display
Buttons failure
The Wi-Fi signal
cannot be found
APP cannot control
the lamp
The light does not
operate according to
the timed set
brightness
The lamp Wi-Fi works at AP Mode
The lamp Wi-Fi works at STA Mode, in the status waiting for
configuration
The lamp Wi-Fi works at STA Mode, and an error had occurred while
connecting to a home router, the reason may be that the password
is wrong or the router is turned off.
Wi-Fi is transmitting data
Wi-Fi has no data transmitted
Cause Analysis
The power plug is not properly inserted
or the switch is not turned on
The water joint is not properly connected
Machine fault
There is foreign material disturbed on the
buttons panel
Machine fault
The lamp Wi-Fi is configured to STA Mode
The phone is far away from the lamp or
WLAN is net enabled
Machine fault
The phone is not connected to the Lamp
The network signal is bad or the lamp
connection is disconnect
Machine fault
The timing data set is not successfully
saved
The time on the lamp is not correctly set
Machine fault
Meaning
Solution
Check the plug and turn on the
switch
Recheck and connect it well
Sent
to
after-sale
department for repair
Remove the foreign material
and keep the panel clean
Sent
to
after-sale
department for repair
Reconfigure it to AP Mode
Check the phone WLAN and
enable
Sent
to
after-sale
department for repair
Reconnect to the lamp Wi-Fi
Reconnect to the lamp in the
APP
Sent
to
after-sale
department for repair
Reset the data and save
Reset the time
Sent
to
after-sale
department for repair
service
service
service
service
service
Publicité
