LITHIUM-Mode:
Suitable for 4-cell-LiFePO4 only !
Note: If the voltage of the battery is not 11.6V - 13.8V, the LITHIUM-Mode is not
available. A long press (3 sec.) of the Mode-button is needed to be able to select this
mode.
RECOVER-12V-Mode:
(mainly suitable for 12 V lead-acid batteries with a capacity greater than 12 Ah)
Select this charging mode to recover and charge a deeply discharged or sulphated
12V battery using pulse charging.
Note: A long press (3 sec.) of the Mode-button is needed to be able to manually
select this mode.
WARNING: Never use this mode with Lithium-batteries. Please read the instructions
of your battery manufacturer.
Digital Display:
Shows voltage and current of the selected charging mode and the connected battery
Wrong Polarity: This symbol flashes if a battery was connected in reversed polarity.
Check the polarity and connection and reattach the charging cables.
Defective-Battery:
-
-
Not Connected: This symbol flashes if no battery is connected or the connection is
interrupted. Check the connection and reattach the charging cables.
Battery-level:
This symbol will flash during the charging process. The bars indicate the progress:
1 bar (20%), 2 bars (40%), 3 bars (60%), 4 bars (80%), 5 bars (90%)
If the symbol stops flashing, the battery is considered as fully charged and the
charger will switch automatically to "Maintenance / Trickle charging" to keep the
battery in a fully charged state.
Memory-function
The charger will return to the last charging mode when disconnected and reconnected. If this mode is
not compatible with the connected battery, the charger will automatically return to Standby-mode.
10
voltage: 12.8V charging current: up to 3.0A
voltage: 14.7V charging current: up to 4.0A
As soon as the battery charger has been connected to the mains, the charger
analyses the connected battery: If the battery voltage is lower than 2.0 V
or higher than 14 V, the battery is not suitable or defective and the
"Defective-Battery"-symbol lights up.
If the connected battery is charging in "RECOVER-12V"-Mode and after 3
hours the battery´s voltage is still not higher than 12V the battery is also
considered as defective.