Metabo HPT UB 18DD Instructions De Sécurité Et Mode D'emploi page 11

ASSEMBLY AND OPERATION
APPLICATIONS
Illumination of work site
REMOVAL AND INSTALLATION
METHOD OF BATTERY
○ How to install the battery.
Press the lock to release it, and open the
battery cover.
Always insert it all the way until it locks in place
with a little click. Then, close the battery cover,
and secure it with the lock. (Fig. 5).
Close the stand
Press the lock
Open the
battery cover
Battery
Insert
Click
Fig. 5
○ How to remove the battery.
Open the battery cover, and while pressing the
2 latches (one on each side), slide it and pull it
out. Close the battery cover, and secure it with
the lock. (Fig. 6).
Latches
(Both sides)
Press
NOTE
Ensure that the battery cover is securely
closed unless you are removing or installing
the battery.
If any water or dust enters the body of the tool
or the terminals of the battery, a failure may
occur.
REMOVAL AND INSTALLATION
METHOD OF AC CORD
Power can be supplied by plugging the AC cord
(included) into a standard household outlet.
Pull back the rubber cover and insert the plug of the
AC cord all the way into the socket. The lock ring
rotates simultaneously and secures the connection
in place. (Fig. 7)
Next, plug the AC cord into an electrical outlet.
To detach the AC cord, turn the lock ring counter-
clockwise and hold it in that position while pulling out
the AC cord. (Fig. 7)
English
Pull out
Battery
Fig. 6
11