A 807 Holder For Pk™ Dissecting Forceps - Miele professional A 600 Mode D'emploi

en - Areas of application
A 807 holder for
PK™ dissecting
forceps
50
Fit the instrument into the holder from below.

The pipe connections on the holder must be pushed into the rinse
attachments on the instrument.
Position the shaft of the instrument in the V-shaped recess in the

supporting rail of the A 502 injector unit.
Align the joint at the functional end of the instrument lengthways in

line with the shaft.
Open the functional end of the instrument.
