Attaching Flue Duct - Gaggenau AI 230 700 Notice D'utilisation Et De Montage

Attaching flue duct

9
WARNING
Risk of injury
From sharp edges during installation. Always
wear protective gloves while installing the
appliance.
1 Separate the flue ducts.
To do this, remove the adhesive tape.
2 Remove the protective foil from both sides.
3 Place both parts of the upper flue on the
appliance and push together.
Note: The slots of the upper flue must point
downwards.
4 Push up the upper flue part and secure with
2 screws.
5 Insert both lower parts of the flue and push
together.
Removing the appliance
1 Loosen the flue duct.
2 Disconnect the appliance from the power
supply.
3 Loosen the exhaust air lines.
4 Loosen screws for fastening the appliance.
5 Remove the appliance.
21