Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
English
APPLICATIONS
For charging the metabo HPT batteries types BSL14, BSL18 series.
CHARGING METHOD
NOTE: Before plugging into the receptacle, make sure the following points.
○ The power source voltage is stated on the nameplate.
○ The cord is not damaged.
WARNING:
1. Insert the plug of battery charger into the receptacle.
When the plug of battery charger has been inserted into the receptacle, pilot lamp will
blink in red. (At 1-second intervals)
WARNING:
2. Insert the battery to the battery charger.
Insert the battery into the battery charger as shown in Fig. 2.
Pilot lamp
3. Charging
8
Do not charge at voltage higher than indicated on the nameplate.
If charged at voltage higher than indicated on the nameplate, the
charger will burn up.
Do not use the electrical cord if damaged. Have it
repaired immediately.
BSL1425
BSL1420
BSL1415
BSL1450
BSL1415X
BSL1440
BSL1415S
BSL1430
BSL1825
BSL1820
BSL1815
BSL1850
BSL1815X
BSL1840
BSL1815S
BSL1830
Guide rail
Fig. 2
Publicité
Table des Matières
