Applications; Charging Method - Metabo HPT UC 3SFL Instructions De Sécurité Et Mode D'emploi

English
SPECIFICATIONS
Input power source
Charging time
Charger
Weight

APPLICATIONS

For charging the metabo HPT batteries type EBM315.

CHARGING METHOD

NOTE: Before plugging into the receptacle, make sure the following points.
The power source voltage is stated on the nameplate.
The cord is not damaged.
WARNING:
Do not charge at voltage higher than indicated on the nameplate.
If charged at voltage higher than indicated on the nameplate, the
charger will burn up.
1. Insert the plug of battery charger into the receptacle.
Do not use the electrical cord if damaged. Have it repaired immediately.
8
01Eng_UC3SFL_US
Single phase: AC120V 60Hz
Approx. 30 minutes .......... EBM315
Charging voltage .............................. DC 3.6 V
Charging current .............................. DC 3.0 A
0.7 lbs (0.3kg)
WARNING:
8 4/24/06, 16:58