How To Put On The Palm/Hand Pads - Crivit Sports IAN 93709 Instructions D'emploi

3. Now put the elastic fastening straps around your legs or arms. After this
push the ends at the front of your protector on to the respective hook &
loop areas.
4. The knee and elbow pads must be fastened tightly so that they cannot
shift out of place. They are only able to offer the best possible protec-
tion when worn in this way. However, do not fix the fastening straps so
tightly that blood circulation is restricted.

How to put on the palm/hand pads

1. First open the hook & loop
fasteners.
2. Left guard marked with "left";
right guard marked with "right".
3. Run your thumbs through the
corresponding openings of the
respective protector so that the
palm lies on the upholstered
inside.
4. Now take hold of the fastening
strap labelled 2 in fig. C and
insert it through the loop provided as shown. In order to fasten it, press
the fastening strap 2 against the hook & loop area 1 provided.
5. Stabilise the wrist as shown in fig. D. Wrap the fastening strap around
your wrist as shown with the arrow and press the end against the
hook & loop area.
6. As you see, the bent protection track is now located on the inside of the
hand.
7. The palm/hand pads must be fastened tightly to the wrist so that they
cannot shift out of place. They are only able to offer the best possible
protection when worn in this way. However, do not fix the fastening
straps so tightly that blood circulation is restricted.
8. To take off the palm/hand pads, proceed the other way round.
24 GB