Controls - GE AEE18 Manuel D'utilisation Et Instructions D'installation

About the controls on the air conditioner.
Features and appearance will vary.
TEMP CONTROL

Controls

Temp Control
The temp control is used to maintain
the room temperature . The compressor
will cycle on and off to keep the room at
the same level of comfort . Turn the knob
clockwise to Cooler (blue) and the indoor
air will become cooler . Turn the knob
counterclockwise to Warmer (red) and
the indoor air will become warmer .
Mode Control
hi Cool and Low Cool provide cooling with
different fan speeds .
hi heat and Low heat provide heating with
different fan speeds .
Fan Only setting provides air circulation
and filtering without cooling or heating .
NOTE: If you move the mode control
from a cool setting to Off, a fan setting
or a heat setting, wait at least 3 minutes
before switching back to a cool setting.
4
MODE CONTROL
Cooling Descriptions
For Normal Cooling—Select hi Cool
or Low Cool with the temp control at
midpoint .
For Maximum Cooling—Select hi Cool with
the temp control turned clockwise as far as
possible .
For Quieter and Nighttime Cooling—Select
Low Cool with the temp control at midpoint .
heating Descriptions
For Normal heating—Select hi heat
or Low heat with the temp control at
midpoint .
For Maximum heating—Select hi heat with
the temp control turned counterclockwise
as far as possible .
For Quieter & Nighttime heating—Select
Low heat with the temp control at
midpoint .