Publicité
Les langues disponibles
Les langues disponibles
6. DMX512 Connections
1. Connect the fixture together in a "daisy chain" by XLR plug cable from the output of the
fixture
to the input of the next fixture. The cable cannot be branched or split to a "Y" cable.
Inadequate or damaged cables, soldered joints or corroded connectors can easily distort the
signal and shut down the system
2. The DMX output and input connectors are pass‐through to maintain the DMX circuit
when one
of the units' power is disconnected.
3. At last fixture, the DMX cable has to be terminated with a terminator to reduce signal
errors.
Solder a 120‐ohm 1/4W resistor between pin 2(DMX‐) and pin 3(DMX+) into a 3‐pin
XLR‐plug
22
Publicité
