Causes And Rectification Of Faults - Ellrona Ergo 2000 Mode D'emploi

17.3 Causes and rectification of faults

Ellrona Ergo 2000
If error messages continue to be displayed after an
extended waiting period or after restarting the appliance, then it
must be sent to Customer Service to be examined.
The following table assists in localizing and rectifying minor
faults.
Fault
Display is empty
The - - - error
appears
frequently during
operation
If you are unable to solve the problem with the steps shown
above, please contact Customer Service.
Please note
Possible Cause
Power plug not
plugged in
Fuse switch not
switched on
Cooking vessel too
small
Cooking vessel not
centred on the hob
Please note
Troubleshooting
To Rectify
Insert plug into
mains
socket
Switch on fuse
switch
Use larger
cooking vessel
Position
cooking vessel
correctly
61