Location Of Parts; Handling & Transport - Accucold ACR1515SS Mode D'emploi

Light switch
Interior lighting
(around door)
Stainless steel interior
with stainless steel frame
Thermostat control
Leveling legs
DO NOT MOVE UNIT WITH PRODUCT INSIDE as loose product can break, spill, damage the appliance,
etc.
DO NOT TIP UNIT AT MORE THAN A 45°
ANGLE. DO NOT EXPOSE TO SUNLIGHT
OR STORE AT TEMPERATURES
HIGHER THAN 131°F (55°C).

LOCATION OF PARTS

Handle
Glass door
HANDLING & TRANSPORT
Lighted header
Internal fan
Adjustable shelves (4)
Static condenser
(on back of unit)
Ventilation louvers
Compressor and fan
(behind louvers)
WHEN HANDLING STATIC CONDENSER
MODELS SUCH AS THIS, MAKE SURE
THAT DOOR PIVOT IS LOCATED AS
SHOWN IN FIGURE ABOVE.
6