Publicité
Les langues disponibles
Les langues disponibles
UNIT REVIEW AND INSPECTION
This refrigerator was completely inspected before leaving the factory. Check for signs of damage
when the unit is received. If there is any damage, contact your authorized distributor or manufacturer
immediately. Check that the following accessories are included with your refrigerator:
●
Metalic shelves (packed in plastic wrap inside unit cabinet)
●
Shelf clips (packed separately in a plastic bag inside the cabinet)
INSTALLATION INSTRUCTIONS
This model is designed for interior use at a maximum operation temperature of 80.6°F (27°C) and
55% humidity. It is meant to be free-standing and not built into an enclosure.
Do not place the unit near heat sources such as stoves, grills, radiators, etc. and do not place in
areas where direct sunlight may reach the unit.
CAUTION: This appliance is designed for storing and cooling pharmaceuticals, vaccines and other
medical specimens. Do not use it to store perishable food or chemical substances like
solvents and reagents.
Location of your Appliance
It is recommended that the rear portion and both sides of your refrigerator be at least 8 inches and 6
inches from the wall respectively, to allow air flow to the compressor and improve heat transfer.
Place your refrigerator on a level surface.
Minimum Distances
Once the unit is installed, check that it is level. If necessary, use the two front legs to adjust the
height of the unit.
6
Publicité
