Publicité
Les langues disponibles
Les langues disponibles
Energy-Saving Tips
●
DO NOT DISCONNECT UNIT AT NIGHT. Not only will contents most likely suffer damage, but
reconnecting next day will increase energy consumption.
●
DO NOT keep the door open any longer than necessary.
●
DO NOT OVERLOAD UNIT. Allow free air flow inside refrigerator.
●
DO NOT PLACE HEAVY AND/OR LARGE OBJECTS INSIDE UNIT.
●
It is important not to block air flow inside the refrigerator. Remember that it is designed
exclusively for cooling vaccines, pharmaceuticals and other medical specimens.
●
The appliance should be located in the coolest area of the room, away from heat-producing
appliances and out of direct sunlight.
●
Ensure that the unit is adequately ventilated. Never cover air vents.
●
DO NOT PLACE FOODS IN REFRIGERATOR. Not only will you risk contamination of medical
products, but the forced air system will absorb moisture from the food.
You can solve many common problems easily, saving you the cost of a possible service call. Try the
suggestions below to see if you can solve the problem before calling the servicer.
PROBLEM
The unit does not operate.
The unit is not cold enough.
Turns on and off frequently.
The light does not work.
Ice forms on evaporator.
Vibrations
TROUBLESHOOTING
Not plugged in.
Voltage is outside specifications.
Tripped circuit breaker or blown fuse.
Voltage is outside specifications.
Interior air flow is blocked.
There is a nearby heat source.
The door is opened too often.
The door is not closed completely.
The door gasket does not seal properly.
Condenser needs cleaning.
There is a nearby heat source.
Interior air flow is blocked.
A large amount of product has been added to the refrigerator.
The door is opened too often.
The door is not closed completely.
The door gasket does not seal properly.
Condenser needs cleaning.
Not plugged in.
Tripped circuit breaker or blown fuse.
The light switch is OFF.
High relative humidity in environment.
The door is not closed properly.
The door is opened too often or for too long.
Interior air flow is blocked.
Appliance is not level.
Fan blades are out of balance.
Tubes or moving parts are grazing metallic parts.
POSSIBLE CAUSE
11
Publicité
