Singing Machine STVG-535 Manuel D'instruction page 10

MAKING THE CONNECTIONS
CONNECTING A VIDEO COMPONENT FOR INPUT
Please follow the steps below to display CDG lyrics on the Singing Machine's monitor from
another video source:
(1) Locate the multicolored patch cords.
(2) Connect Video Cable (yellow) to the Video In of the back of the Singing Machine.
(3) Connect the other end of the Video Cable (yellow) to the Video Output on another video
source such as a VCR.
(4) Set the FUNCTION SELECT to AUX mode and the MONITOR ON/OFF switch to ON.
(5) Adjust the BRIGHTNESS, CONTRAST and
monitor of the Singing Machine for the best picture quality.
VIDEO INPUT
(Yellow Jack)
AUDIO CONNECTION
Connect the unit to your TV or home stereo system using the white and red connections on the
supplied patch cord. Plug the white end of the patch cord into the white AUX OUT jack on the
unit. Plug the red end of the patch cord into the red AUX OUT jack on unit. Now connect the other
end of the cable's white (left channel) and red (right channel) plugs to your TV or home stereo
system's 'AUDIO IN' or 'AUX IN' jacks.
REAR VIEW OF
SINGING MACHINE
AUX OUTPUT AUX OUTPUT
L
(White Jack)
REAR VIEW OF
SINGING MACHINE
VIDEO AUX
OUT
IN IN
L
R
OUT
AUX
OUT IN
L
R
R
(Red Jack)
E9
VERTICAL HOLD knobs located under the
REAR VIEW OF VCR
VIDEO OUT
VIDEO OUTPUT
(Yellow Jack)
REAR VIEW OF TV
R
VIDEO IN
AUDIO INPUT
R
(Red Jack)
R L
AUDIO OUT
L
AUDIO IN
AUDIO INPUT
L
(White Jack)