Handling - Renkforce 449238 Notice D'emploi

9. Handling

• Operation of the product is only permitted in dry, closed rooms. The product must not get damp or wet.
There is danger to life from electric shock!
• Never use the product immediately after it was taken from a cold into a warm environment. The conden-
sation generated may destroy the product. Moreover, there is the risk of a fatal electric shock!
Let the product reach room temperature before connecting and using it. This may take several hours.
• Servicing or repair must only be carried out by a specialist/specialist workshop.
• Check the product for damage before each use.
If there is any damage, the product must not be connected to mains voltage or switched on!
It can be assumed that safe operation is no longer possible if:
- the product is visibly damaged
- the product does not work properly or not at all anymore (e.g. smell of fire)
- the product was stored under unfavourable conditions
• When setting up the product or assembling the product, make sure that the cables are neither bent nor
pinched.
• If the product is not to be used for an extended period, (e.g. for storage), disconnect the product from the
mains voltage and pull the mains plug from the mains socket.
• The following unfavourable conditions are to be avoided at the place of installation or during transport:
- dampness or high humidity
- extreme cold or heat
- dust or flammable gases, fumes or solvents
- strong vibration
• Never push the display. The glass could break. Loss of warranty/guarantee!
41