DIMM Slots
Memory module installation recommendation
Important
Always insert memory modules in the DIMMA2 slot first.
y
Due to chipset resource usage, the available capacity of memory will be a little less
y
than the amount of installed.
Based on processor specification, the Memory DIMM voltage below 1.35V is
y
suggested to protect the processor.
Some memory modules may operate at a lower frequency than the marked value
y
when overclocking due to the memory frequency operates dependent on its Serial
Presence Detect (SPD). Go to BIOS and find the DRAM Frequency! to set the memory
frequency if you want to operate the memory at the marked or at a higher frequency.
It is recommended to use a more efficient memory cooling system for full DIMMs
y
installation or overclocking.
The stability and compatibility of installed memory module depend on installed CPU
y
and devices when overclocking.
Due to AM4 processor/memory controller official specification limitation, the
y
frequency of memory modules may operate lower than the marked value under the
default state. Please refer www.msi.com for more information on compatible memory.
14
Overview of Components
DIMMA2
DIMMA1
Channel A
DIMMA2
DIMMB2
DIMMA2
DIMMB1
Channel B
DIMMB2
DIMMB2
DIMMB1
DIMMA2
DIMMA1