Ribimex PRGE0800 Mode D'emploi page 18

2. Place the ON/OFF switch to ON (Fig. 4).
3. Place the choke lever to
4. Gently pull the starter until you feel resistance and pull firmly (Fig. 6). Repeat the operation if
the engine does not start the first time.
5. Push gradually the choke lever back to initial position after the engine has started.
6. Plug your appliance into the socket provided.
4.4- Stopping the engine
1. Before turning off the generator, allow it to cool down by running with no appliances.
2. Place the ON/OFF switch to OFF position (Fig. 7).
Fig. 3
position (Fig. 5).
Fig. 4
Fig. 5
Fig. 6
18 33
Page /