5
Installation and
connection
S cope of supply
I n s t a l l a t i o n a n d c o n n e c t i o n
After unpacking all parts, check for any
damage in transit.
If you have any complaints, contact the
dealer from whom you purchased the
appliance or our customer service.
~ "Customer service" on page 31
The delivery consists of the following
parts:
Built-in appliance
■
Interior fittings (depending on model)
■
Installation material
■
User manual
■
Installation instructions
■
Customer service booklet
■
Warranty enclosure
■
Information on the energy
■
consumption and noises
Technical specifications
Refrigerant, cubic capacity and further
technical specifications can be found on
the rating plate.
~ "Getting to know your appliance"
on page 23
Installing the appliance
Installation location
The more refrigerant an appliance
contains, the larger the room must be in
which the appliance is situated. In
rooms which are too small leaking
refrigerant can form a flammable gas-air
mixture.
Installation and connection en
Per 8 g of refrigerant the room must be
at least 1 m³ in size. The amount of
refrigerant in your appliance is indicated
on the rating plate inside the appliance.
~ "Getting to know your appliance"
on page 23
The weight of the appliance may be up
to 76 kg depending on the model.
Permitted room temperature
The permitted room temperature
depends on the climatic class of the
appliance.
Information on the climatic class can be
found on the rating plate.
~ "Getting to know your appliance"
on page 23
Climatic
Permitted room
category
temperature
+10 °C ... 32 °C
SN
N
+16 °C ... 32 °C
ST
+16 °C ... 38 °C
+16 °C ... 43 °C
T
The appliance is fully functional within
the permitted room temperature.
If an appliance of climatic class SN is
operated at colder room temperatures,
the appliance will not be damaged up to
a room temperature of +5 °C.
Cavity depth
A cavity depth of 56 cm
is recommended for the appliance.
If the cavity depth is smaller – at least
55 cm – the energy consumption
increases slightly.
21