Set Up - RedMax BCZ3050S Mode D'emploi

6. Set up

Tighten the screws gradually by turns.
INSTALLING HANDLE
SE1
• Mount the handle to the shaft tube and
clamp it at a location that is comfortable
to you. (SE1)
(1)
(1) About 19 inches (48cm)
[BCZ3050S]
(2) About 14.5 inches (37cm)
[BCZ3060TS]
[BCZ3050SW]
HIP PAD
SE2
• Fix the tube by the band. (SE2)
(1)
(1) Band
INSTALLING CUTTING ATTACHMENT
SE3
GUARD
• Put the cutting attachment guard on the
braket, attach it with the 2 screws.
(SE3)
[BCZ3050S]
[BCZ3060TS]
2 kinds of cutting attachment guard are
packed in with BCZ3050SW. Choose the
guard suitable for a line head. If the right
guard is not used, it may lead to a serious
(2)
(1)
accident. (SE3)
(1) Guard for Line Head (Red) :
[BCZ3050SW]
(848-JR1-66A0)
(2) Guard for Blade (Black) :
(T3246-24110)
IMPORTANT
IMPORTANT
INSTALLING LINE HEAD (SE4)
1. While locking the gear shaft, by
SE4
inserting the supplied tool into the
upper holder on the gear box, loosen
and remove the hexagon nut(left-
handed)
2. Fit the line head assembly to the gear
[BCZ3050S]
shaft over the holders. Hand-tighten it
[BCZ3050SW]
securely.
IMPORTANT
[BCZ3050SW]
• You need not holder (B) and nut when
installing the line head.
INSTALLING TRIMMER HEAD (SE5)
SE5
1. While locking the gear shaft, by
inserting the supplied tool into the
upper holder on the bevel gear.
2. Fit the trimmer head assembly to the gear
shaft over the drive disc and spacer.
Hand-tighten it securely.
[BCZ3060TS]
BCZ3050S/SW/3060TS
U
S
US-9