Optional Blade Usage - RedMax BCZ3050S Mode D'emploi

12. Optional blade usage

WARNING
• For security reason, in case of mounting the blade on this
product and use it, purchase the blade kit (966 42 40-01)
and change guard, handle from the original ones, and use
shoulder strap. (OPT1 – OPT4)
OPT1 Blade Kit : 966 42 40-01
(1) Shoulder strap
OPT2
(2) Guard
(3) J-handle
(4) Bracket ASSY
(5) Cover
(6) Holder (B)
OPT3
Change to the debris guard which is
suitable for the metal blade.
OPT4
[BCZ3050S] [BCZ3060TS]
Change the loop handle to the J-handle
for safe operation.
IMPORTANT
TIGHTENING TORQUE :
26 – 43.5 in-lbs
(2.94 – 4.9 N.m.)
IMPORTANT
WARNING
• When sharpening, removing, or reattaching the blade, be
sure to wear thick, sturdy gloves and use only proper tools
and equipment to prevent injury.
■ CHOOSE THE BLADE
Choose a suitable recommended cutting attachment according to
the object to be cut. (OPT5)
• When replacing blade always be sure to use products which
have been certified by RedMax.
(1)
OPT5
(2)
(A)
(B)
(C)
(D)
(1) 9" 22-tooth :SST229
(2) 9" 24-tooth :SST249
(3) 8" 8-tooth :SGB088
(4) 9" 8-tooth :SGB089
(5) 8" 4-tooth :SGB048
(6) 9" 4-tooth :SGB049
(7) Nylon line head
(A) Under growth
(B) Heavy weeds
(C) Light weeds
(D) Grass
■ SET UP THE BLADE
1. Detach the line head assembly. (OPT6)
2. Put on the blade, making the marked
OPT6
side face the shaft side, put the holder
(3)
and the cover on, and fasten the blade
(1)
with the nut. (OPT6)
(2)
(1) Cover
(3) Nut : (STANDARD)
OPT7
■ BALANCE UNIT
1. Put on strap and attach unit to strap.
2. Slide clamp up or down until unit
balances with head just touching on the
ground. (OPT7)
BCZ3050S/SW/3060TS
(3) (5)
(7)
(4) (6)
TIGHTENING TORQUE :
130 – 174 in-lbs
(14.7 – 19.6 N.m.)
(2) Holder (B)
U
S
US-17