Cycle Guide - Crosley W10096992A Guide D'utilisation Et D'entretien

CYCLE GUIDE — SENSOR DRY/AUTO DRY CYCLES
SENSOR DRY/AUTO DRY – Senses moisture in the load or air temperature and shuts off when the load reaches the selected dryness
level. Choose ENERGY PREFERRED cycle for optimal energy savings.
Not all cycles and settings are available on all models. Settings and options shown in bold are default settings for that cycle.
Items to dry:
Jeans, heavy work
clothes, towels
Work clothes, medium
weight fabrics, sheets
Casual, shirts, pants,
lightweight items,
synthetics, delicates,
athletic wear
NOTE: If loads do not seem as dry as you would like, select Heavy Dry or Very Dry/More Dry next time you dry a similar load. If loads
seem drier than you like, select Less Dry next time you dry a similar load.
CYCLE GUIDE — TIMED DRY CYCLES
TIMED DRY – Will run the dryer for the specified time on the control.
Not all cycles and settings are available on all models.
Items to dry:
Large or heavy items
such as thick towels or
robes
Heavy or bulky items
Small loads,
lightweight items
Rubber, plastic,
heat-sensitive fabrics
Setting the Drying Temperature
If your dryer has multiple heat settings:
A High temperature setting may be used for drying
heavyweight items such as towels and work clothes.
A Low to Medium temperature setting may be used for
drying medium-weight items such as sheets, blouses,
dresses, underwear, permanent press fabrics, and
some knits.
6
Dryness Level: Temperature:
Heavy Dry High
Very or More Dry
Energy Preferred
Less Dry
Heavy Dry Medium or Low
Very or More Dry
Energy Preferred
Less Dry
Low
Heavy Dry
Very or More Dry
Energy Preferred
Less Dry
Cycle: Temperature:
Heavy Dry High
Timed Dry High
High Heat
Timed Dry Low
Air Only/No Heat
Air Dry/
No Heat
Available
Options:
Wrinkle Prevent Automatic cycles give the best drying
in the shortest time. Drying time varies
End of Cycle Signal
based on fabric type, load size, and
dryness setting.
Select a drying temperature based on
Wrinkle Prevent
the fabrics in your load. If you are unsure
End of Cycle Signal
of the temperature to select for a load,
select the lower setting rather than the
higher setting.
Wrinkle Prevent
End of Cycle Signal
Available
Options:
End of Cycle Signal Choose high to dry large or heavy loads.
End of Cycle Signal Completes drying if items are still damp.
End of Cycle Signal Dries items to a damp level or for items
that do not require an entire drying
cycle.
End of Cycle Signal
No-heat drying.
Use the Air Dry/No Heat setting for foam, rubber, plastic,
or heat-sensitive fabrics.
Line-dry bonded or laminated fabrics.
NOTE: If you have questions about drying temperatures for
various loads, refer to the care label directions.
Cycle Details:
Cycle Details: