Using The Controls; Select Cycle; Select Temperature; Select Signal - Crosley CD-3 Guide D'utilisation Et D'entretien

Using the Controls

STEP 1

Select Temperature

To select the correct temperature, turn the temperature
control to Regular, Medium (select models), Low or Air
Fluff.
DRYER TEMPS
Sturdy cottons or labels marked
Regular
Tumble Dry.
For permanent press, synthetics,
Medium lightweight cottons or items
(select models)
labeled Tumble Dry Medium.
For heat sensitive items labeled
Low
Tumble Dry Low.
Items which need freshening.
Air Fluff
Load tumbles with room
temperature air.
STEP 2

Select Signal

End of Cycle Signal
When the cycle is complete, a signal will sound several
times. On select models the End of Cycle Signal
volume is adjustable. To adjust the volume, select any
setting between OFF and HIGH.
3
LOAD TYPE
STEP 3

Select Cycle

To select a cycle, rotate the control dial to the desired
setting. When using an Auto Dry/Sensor Dry cycle, the
control dial should point between More Dry and Less
Dry for most loads.
Loads of larger or bulkier size may require the More
Dry setting to completely dry the load. The Less Dry
setting is best suited for lightweight fabrics or for leaving
some moisture in the clothing at the end of the cycle.
Regular Fabrics
The Regular cycle is designed to dry most cottons and
linens. At the end of the cycle, the clothes are cooled
to reduce wrinkling.
Wrinkle-Free Fabrics
The Wrinkle-Free Fabrics cycle is designed to dry
wrinkle-free cottons, synthetic fabrics, double knits and
permanent press fabrics automatically.
Wrinkle Out (select models) is provided to minimize
wrinkles in the Wrinkle-Free Fabrics cycle. This feature
provides an extra 60 minutes of unheated tumble
action at the end of the cycle. Clothes can be removed
any time during this portion of the cycle. The additional
60 minutes can be cancelled by setting the knob to
OFF.