Setting The Light; Change Filter Alarm; Alarm; Door Alarm - Bosch B36CL0EN Série Notice De Montage Et D'utilisation

en-us Alarm

Setting the light

You can adjust the brightness levels of the interior
lighting from 0 ... 5:
Note:
0 = lighting off
1 = minimum brightness
5 = maximum brightness
Press menu button.
1.
Press light settings button.
2.
The submenu display shows In.
Press Y/X Settings button repeatedly until the
3.
settings display shows the desired brightness
level.
Press menu button.
4.
The setting is saved.

Change filter alarm

When the change filter alarm switches on, the
change filter button lights up. The alarm is designed
to switch on every 6 months but it may not always
do so. It is recommended to change the water filter
every 6 months.
An increase in ice and water consumption will
Note:
cause the change filter alarm to be switched on
earlier.
Switching off the change filter alarm:
Change water filter or replace with bypass filter.
1.
~ "Water filter" on page 19
Press and hold change filter button for
2.
3 seconds.
The change filter alarm is switched off and the
change filter button is no longer lit up. The water
filter timer is reset automatically.
If you replace the water filter before the change filter
alarm lights up, reset the water filter timer manually:
Note:
1 = water filter timer running
0 = reset water filter timer
Press menu button.
1.
Press change filter button.
2.
Press Y/X Settings button until settings display
3.
shows 0.
Press menu button.
4.
The setting is saved.
22
MAlarm
D oor alarm
A l a r m
If the appliance door is left open for a while, a
warning sound is switched on and the alarm off
button flashes.
Switching off door alarm:
Close the door or press the alarm off button.
■
The warning sound is switched off and the
alarm off button no longer flashes.
You can switch the door alarm warning sound on or
off:
On = switch on door alarm warning sound
Note:
OF = switch off door alarm warning sound
Press menu button.
1.
Press alarm off button.
2.
Press Y/X Settings button until settings display
3.
shows On or OF.
Press menu button.
4.
The setting is saved.

Temperature alarm

If the freezer compartment becomes too warm, the
warning sound switches on and the alarm off button
flashes.
9
CAUTION
DURING THE THAWING PROCESS, BACTERIA
MAY DEVELOP AND SPOIL THE FROZEN
ITEMS
Do not refreeze partly or completely thawed
food.
Refreeze food only after cooking. The frozen
items should no longer be stored for the
maximum storage period.
The temperature alarm can be set off without
Note:
risk to the frozen food in the following situations:
The appliance is switching on.
■
If the freezer compartment door has been open
■
too long.
Large quantities of fresh food are being placed
■
inside.
Switching off the temperature alarm:
Check that the cause of the temperature alarm
1.
has been eliminated.
Press the alarm off button.
2.
The warning sound will be switched off and the
freezer compartment temperature display will
briefly indicate the warmest temperature reached
in the freezer compartment. Then the display
indicates the set temperature again. The warmest
temperature will be measured again and saved.
The alarm off button remains lighted until the
Note:
set temperature has been reached again.