Connecting The Speakers And Input Wires - Pioneer PRS-D4200F Mode D'emploi

Connecting the Speakers and Input Wires

The speaker output mode can be four-channel, three-channel (stereo + mono)
or two-channel (stereo, mono). Connect the speaker leads to suit the mode
according to the figures shown below.
Four-channel
Input select switch is on the top of the unit. For two-
channel input, slide this switch to the left. For four-
channel input, slide this switch to the right.
From car stereo (RCA output)
If only one input plug is used, such as
when the car stereo has only one output
(RCA output), connect the plug to RCA
input jack A, but do not connect a plug to
RCA input jack B.
Three-channel
Input select switch is on the top of the unit. For two-
channel input, slide this switch to the left. For four-
channel input, slide this switch to the right.
From car stereo (RCA output)
If only one input plug is used, such as
when the car stereo has only one output
(RCA output), connect the plug to RCA
input jack A, but do not connect a plug to
RCA input jack B.
RCA input jack A
RCA input jack B
Connecting wires
with RCA plugs
(sold separately)
RCA input jack A
RCA input jack B
Connecting wires
with RCA plugs
(sold separately)
(Left)
Speaker out B
(Right)
(Right)
Speaker out A
(Left)
Speaker out B
(Mono)
(Right)
Speaker out A
(Left)
12