Cameo F4 Manuel D'utilisation page 9

STAND-ALONE MODE USER COLOR (Individual color presets 1 - 8)
Starting from the main display, press on the left push button rotary encoder to move to the mode selection menu. Rotate the left encoder
(SELECT) to select "User Color" mode (as indicated by selector arrow on left) and confirm by pressing the left encoder (ENTER). Now select
one of the 8 preset but customizable user colors by rotating the left encoder. Confirm the selection by pressing the left encoder (ENTER). The
brightness level (DIM) of the user color can now be set using the left encoder (see illustration). The individual preset settings and the name
of the user color can be modified using the "Edit User Color" menu item.
currently activated mode
Rotate encoder =
set DIM
Press encoder =
select mode
STAND-ALONE MODE EDIT USER color (Edit User Color)
Starting from the main display, press on the right push button rotary encoder to move to the main menu. Rotate the left encoder (SELECT) to
select "Edit User Color" menu item (as indicated by selector arrow on left) and confirm by pressing the left encoder (ENTER). You can now
select one of the 8 color presets by rotating the left encoder and then confirm the selection by pressing on the left encoder (ENTER).
Now enter a custom name of up to 12 digits to be assigned to the preset (Edit User Color Name) by rotating the left encoder to a letter,
underscore or number for the first position of the preset name, confirming the selection by pressing on the left encoder. The second position
etc is chosen in the same way. Once the preset name is complete, press the center encoder (Save&Next) to move to the next step of editing.
If you press on "Save&Next" without selecting a letter, underscore or number for the first position, then the previous preset name is retained
and you move immediately to the next step of editing.
Now you can decide in which way you wish to create the color for the preset, i.e. one of the 4 methods "CCT", "HSI", "DIRECT" and "GEL",
as selected by rotating the left encoder (SELECT) and confirmed by pressing the left encoder (ENTER).
Rotate encoder =
select filter preset
Fan mode
Press encoder =
Open main menu
9