Abus TVCC71000 Manuel Utilisateur page 29

White Balance (WHITE BAL)
Function
ATW
PUSH
USER1 / User 2
ANTI CR
MANUAL
PUSH LOCK
BACKLIGHT
Function
OFF
BLC
HLC
PICT ADJUST
Function
MIRROR
BRIGHTNESS
CONTRAST
SHARPNESS
HUE
GAIN
Description
Auto Tracking White Balance
The setting for the white balance function will be performed
dynamically and continuously in the range of 1800~10500K.
Continuous setting for the white balance with limitation of color
temperature range
User defined white balance
B-GAIN (0~255):
R-GAIN (0~255):
Optimized white balance settings for fluorescent light, to avoid
cross color effects
Manual white balance
B-GAIN (0~255):
R-GAIN (0~255):
Push Lock
The white balance measurement will be performed by pressing
the „Enter" button on the control board, and will be stored.
Description
The back light handling is turned off.
The conventional back light compensation function is activated.
(Back Light Compensation)
The function for inversion of too bright image areas into black
color is activated (High Light Compensation). Too bright image
areas will be converted to black areas over certain value (e.g.
car lights).
Description
Horizontal mirror
OFF: Horizontal image inversion is deactive
ON: Horizontal image inversion is active
Brightness (0~255)
Contrast (0~255)
Sharpness (0~255): A high value of sharpness could increase
Hue (0~255)
Gain (0~255):
Blue value
Red value
Blue value
Red value
the noise level.
Setting for the maximum internal gain
value.
29