OK. ORC 500-B Mode D'emploi page 18

EN
TAPE (CASSETTE) MODE
Set the function switch to the TAPE/OFF position. Power indicator does not light up at that
9
moment.
Press button to open the cassette deck.
10
Insert the cassette inside the deck. Close the deck.
11
Start playback:
Pause playback:
Stop playback:
Rewind or forward Press
CD/MP3/USB MODE
Set the function switch to the AUX/CD/USB position. Power indicator lights up.
12
Open the CD compartment door and insert a CD with a label facing up.
13
Close the CD compartment door.
14
or
Connect a USB storage device to the USB port
15
Press and hold
16
on the display. In either mode, playback will start automatically from the first track.
Note: If no CD or USB storage is inserted, the display shows NO.
CD/MP3/USB PLAYBACK
1. Start or pause playback:
17
2. Stop playback.
3. Skip to next track: Press
4. Skip to previous track: Press
5. During playback, press MODE repeatedly to switch the playback modes as follows:
Press
1x
2x
3x
4x
5x
Only for MP3:
Select desired: folder Press
Notes:
• This appliance reads CD, CD-R/-RW and MP3-CD discs. Other discs are not supported.
• When playing CD-R/RW discs the playback quality might be influenced by the quality of the burned
disc. When burning CD-R/RW disks with audio files we recommend using the slowest burning speed.
ORC500-B_A5_140327 (1.0).indb 18
Press . Power indicator lights up.
Press . Press again to resume playback.
Press .
and .
to toggle between USB and CD mode. In the USB mode, USB / MP3 appears
Press . In pause mode, track number will flash on the display.
Press . In stop mode, total number of tracks will flash on the display.
. Press and hold to fast forward.
. Press and hold to fast reverse.
Display Result
REP Repeat one track.
REP ALL Repeat all tracks.
ALBUM Repeat album (only for MP3).
RAND Play a track randomly.
- Normal playback.
ALBUM + or ALBUM
18
.
-.
9/4/14 11:11 AM