Hilti SB 4­22 Mode D'emploi Original page 12

▶ If the battery is too hot to touch, it may be defective. Put the battery in a place where it is clearly visible
and where there is no risk of fire, at an adequate distance from flammable materials. Allow the battery to
cool down. If it is still too hot to touch after an hour, the battery is faulty. Consult Hilti Service or read the
document entitled "Instructions on safety and use for Hilti Li-ion batteries".
Observe the special guidelines applicable to the transport, storage and use of lithium-ion batteries.
→ page 11
Read the instructions on safety and use of Hilti Li-ion batteries that you can access by scanning
the QR code at the end of these operating instructions.
3 Description
3.1 Product overview
3.2 Intended use
The product described is a cordless bandsaw. It is designed for cutting metals and plastics.
The product is designed for two-handed operation.
• For this product, use only Hilti Nuron lithium-ion batteries of the B 22 series. For optimum performance,
Hilti recommends the batteries stated in the table at the end of these operating instructions for this
product.
For these batteries, use only Hilti chargers of the type series stated in the table at the end of these
•
operating instructions.
3.3 Possible misuse
▶ Do not use the power tool to cut bricks, concrete, cellular concrete, natural stone or tiles.
▶ Do not use the product to cut pipes containing liquids or gas.
▶ Do not saw into unknown materials.
3.4 Items supplied
Bandsaw, side handle, belt hook, 2 screws, operating instructions
Other system products approved for use with this product can be found at your local Hilti Store or at:
www.hilti.group
6 English
1
Switch-on interlock
@
Control switch
;
Grip (insulated gripping surface)
=
Side handle (insulated gripping surface)
%
Clamping lever, bandsaw blade
&
Direction-of-rotation arrow on casing
(
Bandsaw blade
)
Cutting guide
+
Belt hook
§
Roller for bandsaw blade
/
Rubber ring
:
Blade guide
∙
Installation opening for accessories
$
Battery
£
Saw blade guard
|
Saw blade guard fastening screw
¡
Battery release button
Q
Battery status indicator
W
2289591
*2289591*