Hilti SB 4­22 Mode D'emploi Original page 14

4 Technical data
Weight without battery
Rated voltage
No-load speed
Max. cutting depth
Tool dimensions (Length x width x height)
Dimensions, bandsaw blade (Length x width x thickness)
Ambient temperature for operation
Storage temperature
4.1 Battery
Battery operating voltage
Weight, battery
Ambient temperature for operation
Storage temperature
Battery charging starting temperature
5 Preparations at the workplace
WARNING
Risk of injury by inadvertent starting!
▶ Before inserting the battery, make sure that the product is switched off.
▶ Remove the battery before making any adjustments to the power tool or before changing accessories.
Observe the safety instructions and warnings in this documentation and on the product.
5.1 Charging the battery
1. Before charging the battery, read the operating instructions for the charger.
2. Make sure that the contacts on the battery and the contacts on the charger are clean and dry.
3. Use an approved charger to charge the battery. → page 6
5.2 Inserting the battery
WARNING
Risk of injury by short circuit or falling battery!
▶ Before inserting the battery, make sure that the contacts on the battery and the contacts on the product
are free of foreign matter.
▶ Make sure that the battery always engages correctly.
1. Charge the battery fully before using it for the first time.
2. Push the battery into the product until it engages with an audible click.
8 English
3.2 kg
(7.1 lb)
21.6 V
172 m/min
(564 ft/min)
63.5 mm
(2.50 in)
351 mm x 248 mm x 217 mm
(13.8 in x 9.8 in x 8.5 in)
28.875 in x 0.5 in x 0.02 in
(733 mm x 12.7 mm x 0.5 mm)
or 28.875 in x 0.5 in x 0.01 in
(733 mm x 12.4 mm x 0.35 mm)
−17 ℃ ... 60 ℃
(1 ℉ ... 140 ℉)
−20 ℃ ... 70 ℃
(−4 ℉ ... 158 ℉)
21.6 V
See the end of these
operating instructions
−17 ℃ ... 60 ℃
(1 ℉ ... 140 ℉)
−20 ℃ ... 40 ℃
(−4 ℉ ... 104 ℉)
−10 ℃ ... 45 ℃
(14 ℉ ... 113 ℉)
2289591
*2289591*