EIBENSTOCK EBS 120.1 Notice Originale page 16

Switching on and off
Short-Time Operation
Switching-on: press the on/off switch
Switching-off: release the on/off switch
Permanent Operation
Switching-on: press the on/off switch and, keeping it pressed, engage the
lock-on button
Switching-off: press the on/off switch and release it again
Attention!
In case of every stop of the machine or a power cut, the
!
lock-on button has to be released immediately by pressing
the ON/OFF switch. So you can avoid an unintentional
restart of the machine (physical hazard).
Application of Grinding Wheels
Type
Diamond Grinding Wheel
Concrete
Screed
Rapid K
Max. Colour
Rated Speed
10,000 rpm gold,
sand
10,000 rpm yellow
10,000 rpm blue
16
Application
for finishing and facing
concrete, brick, lime sand-
stone, basalt, sandstone
for finishing fresh and
green concrete, screed,
lime mortar plaster,
mortar, plaster, soft
limestone
for removing epoxy resin
and
two-component coatings