Parts Included; Installation Procedure - Toto Oberon TS362P Manuel D'installation Et D'utilisation

Check to make sure that all these parts were included in your packaging:
Escutcheon*
Long Screws (2)
* Actual product may differ in appearance from illustration depending on the model.
1. Confirm that the valve has been installed properly and pull the plaster
guard outwards to remove.
N OTE: The finished wall surface should be between the min and max
markings on the plaster guard. See the TSPTM installation manual for further
information.
2. Use the two long screws
to secure the collar to the
valve (ill. 1). Make sure the
screw hole of the collar is
oriented on the bottom.
Correct Installation
Screw hole

PARTS INCLUDED

Collar
Adapter

INSTALLATION PROCEDURE

Handle
Screw
ill. 1
Valve
3
Screw and Lock Washer
Set Screw and Allen
Wrench
Finished wall
Collar
Long screws