Alto Professional TS3 Série Guide D'utilisation page 42

TS315
Output Power
Drivers
Crossover Frequency
Maximum SPL
Frequency Response
Frequency Range
Horn Coverage
Equalization
Connectors
Controls
Indicators
Power
Protection
Enclosure
Mounting/Installation
Dimensions
(height x width x depth)
Weight
Trademarks & Licenses
Alto Professional is a trademark of inMusic Brands, Inc., registered in the U.S. and other countries. All other product
names, company names, trademarks, or trade names are those of their respective owners.
42
2000 watts
(peak, 1300 LF + 700 HF)
Low-Frequency: 15.0" (381 mm) driver, 3.0" (76 mm) high-temperature
voice coil
High-Frequency: 1.4" (35 mm) neodymium driver with precision waveguide
2.0 kHz
134 dB , 131 dB
(peak)
50 Hz – 20 kHz
(-3 dB)
43 Hz – 22 kHz
(-10 dB)
90° horizontal x 60° vertical
Contour switch with low- and high-frequency +3 dB boost
(2) XLR+1/4" (6.35 mm) TRS combo inputs
(1) XLR output
(Link)
(1) IEC power cable input
Power switch, (2) volume control knobs
ground-lift switch
(2) power LEDs
(1 front panel, 1 rear panel)
Connection: IEC
Voltage: 100 V~, 110–120 V~, 220–240 V~, 50/60 Hz, switchable
Fuse: 100–120V T10AL AC250V, or 220–240V T5AL AC250V
Consumption: 800 W
Electronic clip, thermal and transducer overdrive protection
Trapezoidal, injection-molded, polypropylene with perforated steel grille
Standard 36 mm pole socket, wall or ceiling mount with TSB125 bracket,
suspended with integral M10 points, wedge monitor
25.7" x 16.6" x 15.4"
652 x 421 x 392 mm
41.3 lb.
18.8 kg
, 1000 watts
(continuous) (dB-SPL @ 1 m)
(nominal)
(1 per input)
, clip limiter LED
(continuous, 650 LF + 350 HF)
, contour switch,