ECG OV 125 Mode D'emploi page 53

OPERATING INSTRUCTIONS
Properties and parameters
• High precision tensometric sensor.
• Multifunction mode: index measurement of fat, water, muscle and bone and calculation of the
recommended intake of calories.
• Built-in memory for 12 diff erent users.
• Selectable basic weighing mode (skipping parameters settings): Automatic weighing when stepping on
the scale and adding weight when reweighing.
• Low battery and overload indicator.
Buttons functions
Switching on the scale and advance to the next parameter (please see setting personal
SET
parameters)
Each pressing increases the parameter value after each step. Holding down the button will
speed up the increase of value.
Each pressing decreases the parameter value after each step. Holding down the button will
speed up the decrease of value.
Battery inserting / replacement
1. Open the battery compartment cover on the bottom of the scale.
2. Remove depleted batteries. If necessary, use a suitable object for removing
the batteries.
3. Insert new batteries, always one end at a time and then push to ensure the
batteries are correctly inserted. Close the battery compartment cover. Make
sure the + and – signs indicating proper battery polarity are aligned when
inserting new batteries.
Setting the weight unit
On the bottom of the scale is the button for unit change, see picture.
Press this conversion button to change the weight units. When the
scale is off , press the conversion button, the LCD display shows the
current unit of weight. Press again to switch to the required unit.
After selecting the preferred unit, the scale shuts down
automatically after 20 seconds. The next time you turn on the scale,
weight will be displayed in the newly selected units.
• When setting units of weight to lb, the of height will default to
feet / inches.
• When setting units of weight to kg, the height units will default to centimetres.
Note: The default measurement system of the scale depends on the region.
Press
GB
Press
53